Overview

5 and 6 Contact

These connectors are universally used in communications equipment where the highest reliability is needed under the most severe environmental conditions. The standard 5-contact connectors meet all requirements of MILC-55116, latest revision. The 6-contact connectors as well as the light-weight versions, are designed to meet all performance requirements of MIL-C-55116. Mating is accomplished quickly with a twist-lock motion. Non-rigid contacts are spring loaded and provide positive electrical connection with minimum voltage drop.

10 Contact

The 10-contact connectors conform to MIL-C-10544, latest revision. Construction and mating action are similar to the 5-contact line. Years of successful field experience have proven the remarkable reliability of this line of connectors for all types of military and commercial communications equipment.

Features

5 and 6 Contact

• Shells - Stainless steel passivated sand-blasted
• Panel Nuts - Stainless steel passivated sand-blasted
• Contacts - Copper alloy .000030 gold per MIL-G-45204 Type I Class 0 over .001 nickel
• Insulators - Diallylphthalate per MIL-M-14F Type MDG
• Dielectric Strength—500 V RMS
• Insulation Resistance—1000 Meg ohms minimum
• Contact Resistance (mated)—0.050 Ohms maximum
• Air Pressure—2.5 psi
• Immersion—48 hrs. at 6 ft
• Durability—3000 cycles, connect and disconnect

10 Contact

• Receptacle shells - Stainless steel passivated sand-blasted
• Plug shells - Stainless steel black passivated
• Plug rear housing - Aluminium black oxide
• Panel nuts - Stainless steel passivated, sand-blasted
• Contacts - Copper alloy .000030 gold
• Insulators - Diallylphthalate per MIL-M-14F, Type MDG
• Dielectric strength—500 V RMS
• Insulation resistance—1000 Meg ohms minimum
• Contact resistance (mated)—0.015 Ohms maximum
• Air pressure—2.5 psi
• Immersion—48 hrs at 6 ft
• Durability—3000 cycles, connect and disconnect

Please click here for Military Audio data