Elke Technik NATO Connectors

NATO VG96923 Connector

elke Technik is specialist German manufacturer of NATO type connectors. These 2-way and 12-way plugs and receptacles are used for: jump-start leads for cars and commercial vehicles; lifting platforms; heavy haulage equipment used in defence, road construction and mining; building cranes and earthmoving equipment; and, shipbuilding.

These connectors are designed to perform in the toughest environments and are compliant with VG 96917 (2-way connectors), VG 96923 (12-way connectors) and complete cable assemblies compliant with VG 96927.

elke Technik Products
• 2-pole connector plugs for 25mm2, 35mm2, 50mm2 and 70mm2
• Connection cables with double-sided plugs 35mm2 and 70mm2
• Connection cables with callipers and plugs
• Cable lengths according to customer’s request
• Couplers for 35mm2 and 70mm2 cables
• 12-pole connector plugs (pictured, right)

Request a quote on any of our elke Technik products.

elke Technik NATO Catalogue (1.6Mb)

Product Filter
  • 12
Elke NATO Plug 12 Pole Male Contacts 1.5mm2 OLV GRN with Hinged Cover Cap 1667-20.00 - Connector-Tech ALS
Elke NATO Plug 12 Pole Male Contacts 1.5mm2 OLV GRN with Hinged Cover Cap 1667-20.00
elke Technik
MPN : 20 VG96923B3-12P
$165.64
+GST
Elke NATO Panel Receptacle 12 Pole Female Contacts 1.5mm2 OLV GRN - Connector-Tech ALS
Elke NATO Panel Receptacle 12 Pole Female Contacts 1.5mm2 OLV GRN
elke Technik
MPN : 1403-00.00
$116.22
+GST

When ordering a connector it is not always as simple matter of determining between 'male' and 'female' because this can refer to both the housing gender and the contact gender. Many manufacturers offer a given housing gender with both pin and socket. A common example of such confusion occurs in the Deutsch Industrial DT range, where the plug (or male connector) actually contains socket (or female) contacts. For this reason please specify both the contact and housing gender at the time of order.

The IP Rating of a connector or accessory relates to the degree of ingress protection provided by that component. The first digit of the code relates to the degree of protection against access to hazardous parts (conductors etc) and against solid foreign objects. The second digit refers to the degree of protection against the ingress of water. For two examples of this system, consider the most commonly seen IP ratings in our products: IP44 and IP67. IP44 4: Protection from solid objects ≤1mm | 4: Protection against splashing water IP67 6: Protection from dust-sized objects | 7: Protection against immersion in water at depth of 1m for 30mins A complete guide to all IP Ratings is available here.

These terms are used by Phase 3 and ITT Veam on their high-current connectors.The source is considered the half of the connection from which the power is sourced; or the half supplying the electrical power. In an emergency power application, the generator is the source and would be fitted with Panel Source (panel-mount) connectors, a Panel Source Powersafe Box, or Line Source (inline) connectors on pigtails. The drain is the half of the connection which drains the power from the source. In the same emergency power application described above, the network receiving the emergency power supply is the drain and would be fitted with Line Drain connectors, Panel Drain connectors or a Panel Drain Powersafe Box.

We commonly deal with both American Wire Gauge (AWG) and square millimetre (mm2) dimensions as the units used by manufacturers can vary. To convert between measurements please refer this conversion chart.